chelsea.co.nz

diamond grinding & polishing equipment, cutting and drilling

Search chelsea.co.nz

Edge Profile & Polishing

SECTOR Single speed

 

Electronic portable shape-milling machine with fixed rotation speed spindle

The shaping process is realized into a number from 1 to 4 phases, according to the desired finishing degree. Thanks to the high rotation speed and the quality of GHINESTOOLS, achieving a perfect finishing is fast and easy: the diamond wheels must operate at a maximum speed to obtain best cutting performances and longer lifetime. This simple process keeps the same schedule and costs both on “simple” profiles (full bullnose, bird's beak etc) and one of bigger complexity.

Gliding system

- Lubricated nylon rollers (AQUAWHEEL)

- Veil of water (AQUAPLANING)

Spindle (stainless steel)

- Rotation speeds: 8000 rpm

- Rise and fall: 35 mm

Framework: die-casted aluminium

Power: 2 kW

Electronic vectorial inverter

Supply tension: 230V/50-60Hz single-phase

Ground fault interrupter

Dimensions, Weight

- Operating head: 350 x 550 x 350 mm, 33 kg

- Power unit: 370 x 470 x 230 mm, 15 kg

 


SECTOR Triple Speed

 

SECTOR TRIPLE SPEED allows to exploit the properties of every single tool to their maximum and work any material (the diffusion of synthetic materials make necessary an intermediate speed not to make opaque the resin bonded components). This simple process keeps the same schedule and costs both on “simple” profiles (full bullnose, bird's beak etc) and one of bigger complexity. The shaping and polishing process is realized into a number from 5 to 7 phases, according to the kind of material.

The three different tool rotation speeds can be set through the S1, S2 and S3 push buttons:

  • Max speed (10000 rpm): Stock removal and finishing of natural materials (marble, granite…)
  • Intermediate speed (6000 rpm): Stock removal and finishing of any type of synthetic material
  • Min. speed (2600 rpm): Polishing of both natural and synthetic materials by vulcanized GHINESTOOLS wheels

Gliding system

- Lubricated nylon rollers (AQUAWHEEL)

- Veil of water (AQUAPLANING)

Spindle (stainless steel)

- Rotation speeds: 2600, 6000 or 10000 rpm

- Rise and fall: 35 mm

Framework: die-casted aluminium

Power: 2 kW

Electronic vectorial inverter

Supply tension: 230V/50-60Hz single-phase

Ground fault interrupte

Dimensions, Weight

- Operating head: 350 x 550 x 350 mm, 33 kg

- Power unit: 370 x 470 x 230 mm, 15 kg

 


SECTOR Multi Speed

Electronic portable shape-milling machine. It shapes and polishes any type of stone material.

The shaping and polishing process is realized into a number from 5 to 7 phases, according to the kind of material. Thanks to the adjustable rotation speed and the quality of GHINESTOOLS, achieving a perfect polishing is fast and easy. The spindle starts by default at the speed of 3000 rpm, in order not to compromise the vulcanized wheels with excessive rotation speed.

The rotation speed can be finely adjusted from 2400 to over 10000 rpm through two buttons marked +/- and is visualized on the digital tachometer. These features allow exploiting the properties of every single tool to their maximum: the diamond wheels must operate at maximum speed to obtain best cutting performances and longer lifetime; whereas the polishing ones must not exceed 3000-3500 rpm, according to the kind of material.

Gliding system

- Lubricated nylon rollers (AQUAWHEEL)

- Veil of water (AQUAPLANING)

Spindle (stainless steel)

- Rotation speeds: from 2400 to over 10000 rpm

- Rise and fall: 35 mm

- Digital Tachometer

Framework: die-casted aluminium

Power: 2 kW

Electronic vectorial inverter

Supply tension: 230V/50-60Hz single-phase

Ground fault interrupte

Dimensions, Weight

- Operating head: 350 x 550 x 350 mm, 35 kg

- Power unit: 430 x 470 x 230 mm, 17 kg